SpO2 finger sensor for Philips/HP (1.00 m)
56,70 €corresponds 67,47 € VAT included.
excl. 19% VAT plus. Shipping costs
SpO2 finger sensor for Philips/HP (1.00 m). HP/Philips alternatives. Compatible with Philips/HP. 8-pin connector. Part number NI-CR001-6001AS.
- Compatible with
- Philips / HP
- length
- 1.00 m
- Connection
- 8-pin
Available immediately
- Pay by invoice
- Shipping with DHL
- Expert advice 02363 3663-0
Description
SpO2-Adult finger clip for Philips and HP, 100 cm – Reusable sensor.
The finger clip is slid over the fingertip and held in place by spring force. It can be applied and changed in seconds – the standard design for measurements on awake adults.
A SpO2The sensor illuminates the tissue with red and infrared light. Because oxygen-rich and oxygen-poor hemoglobin absorb the two wavelengths to different degrees, the monitor calculates the saturation level. This requires a well-vascularized measurement site and a sensor that neither presses nor slips.
Cable length 100 cm. The short version is intended for use with the adapter cable or the patient-side module; we also carry the same design with a 300 cm cable.
D-shaped connector, 8-pin. It fits directly onto the monitors listed below; an adapter cable is required for other Philips devices.
Intended for these monitors:
Philips C1 · C3 · Virdia · M3 · M4 · MP20 · MP30 · MP40 · MP50 · MP70 · MP80 · VM4 · VM6 · VM8
Corresponds to Philips part number M1196A.
Manufactured by CORERAY as a compatible accessory. The device and part names mentioned are for identification purposes only; this is not original equipment manufacturer (OEM) accessories.
More items from HP / Philips Alternatives
-

SpO2 finger sensor with silicone case, pediatric, for HP/Philips (3.00 m)
Item No. NI-CR001-6001DMade to order64,50 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 finger sensor with silicone bag pediatrics for Nihon Kohden (1.00 m)
Part No. NI-CR001-5501DSMade to order56,50 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 finger clip sensor (pediatrics) for GE-Datex (3.00 m)
Item No. NI-CR001-3104CMade to order61,30 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 Y-sensor to BCI (1.00 m)
Item No. NI-CR001-0601FSMade to order57,30 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 ear sensor to nonin (1.00 m)
Item No. NI-CR001-5701GSMade to order68,00 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 disposable sensor for CSI, adults
Item No. NI-CR003-2001AAMade to order4,50 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 disposable sensor for Mindray, adults
Item No. NI-CR003-5101AAMade to order7,00 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 finger sensor for Mindray (3.00 m)
Part No. NI-CR001-5109AMade to order58,70 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 Y-Sensor to Mindray LM6Pins (3.00 m)
Item No. NI-CR001-5103FMade to order58,70 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 silicone wrap sensor for pediatrics/neonatal use with HP/Philips (3.00 m)
Item No. NI-CR001-6001EMade to order69,00 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 finger clip sensor pediatrics for Nihon Kohden (1.00 m)
Item No. NI-CR001-5501CSMade to order52,00 €Add to Cartexcl. 19% VAT
plus. Shipping costs
-

SpO2 finger sensor for GE-Datex (1.00 m)
Item No. NI-CR001-3101ASMade to order51,50 €Add to Cartexcl. 19% VAT
plus. Shipping costs
Frequently Asked Questions
What professional customers most often want to know before placing an order.
Does SpO2 finger sensor for Philips/HP (1.00 m) fit my device?
Please tell us the make and model of your device – we will check its compatibility before you order. The item number is: NI-CR001-6001AS. This check is free and non-binding: 02363 3663-0 or kontakt@nispel.de. When it comes to accessories for medical technology, the exact device variant is often the deciding factor, not just the model series.
How quickly can SpO2 finger sensor for Philips/HP (1.00 m) be delivered?
This item is available to order. We will confirm the delivery date with your order confirmation. For urgent orders, please call us. 02363 3663-0 – we'll tell you what's possible.
Can my clinic or practice order on account?
Yes. We supply clinics, medical practices, care facilities, and specialist retailers on account. The Nispel shop is exclusively for professionals (B2B); all prices are net, plus VAT. Ordering is possible even without a customer account – you will receive the invoice with your delivery.
Is there a price for larger quantities?
Yes. For station supplies, group orders, and framework agreements, you will receive a separate quote – simply tell us the quantity and desired delivery date. Within Germany, we offer free shipping on orders over €500 net; for orders below this amount, shipping costs are calculated based on actual expenses and displayed in the shopping cart before checkout.
Your question isn't listed here? 02363 3663-0 or kontakt@nispel.de – we answer from practical experience, not from a catalog.












